Game on Field
Tools

Cricket Pitch Dimensions

Official MCC cricket pitch measurements including creases, stumps and fielding circles

Pitch Layout

20.12 m (wicket to wicket)
Popping crease
Popping crease
↔ 1.22m from stumps
↕ Stumps: 0.71m tall

Pitch Dimensions

Pitch Length20.12 m
Pitch Width3.05 m
Popping Crease Dist.1.22 m
Return Crease Length2.44 m

Stumps & Field

Stump Height0.71 m
Stump Width (all 3)0.23 m
Outfield Radius68.00 m
30-Yard Circle27.43 m

Test / ODI vs T20

Test / ODI

  • • Full cricket ground — boundary 65m to 90m from pitch centre
  • • Outfield radius minimum 59.43m (65 yards) from centre
  • • Powerplay circle radius 27.43m — affects fielding restrictions
  • • Pitch surface tended to ICC standards by groundstaff
  • • Pitch conditions change dramatically across 5 days in Tests

T20 / Indoor

  • • Same pitch dimensions as Tests — overs and restrictions differ
  • • Boundary ropes may be shorter in smaller stadiums (min 59.43m)
  • • Indoor cricket uses the same crease markings and stump dimensions
  • • Powerplay (Overs 1–6) restricts fielders outside the 30-yard circle
  • • Shorter format amplifies the impact of pitch conditions and bounce

Important Notes

The "22 Yards": Cricket pitches have traditionally been measured as 22 yards (1 chain), a historical surveying unit. This is exactly 20.12 metres. The distance was standardised in the Laws of Cricket by MCC and has never changed.

Pitch Preparation: The surface condition varies dramatically by match type. Test pitches are prepared over days — the curator controls moisture, rolling, and mowing to produce surfaces with variable bounce and turn. T20 pitches are often more consistent.

Crease Lines: There are four crease lines — the popping crease (batter's safe zone), two return creases (run-out reference), and the bowling crease (where the stumps sit). Each has a specific function in the Laws of Cricket.

Stumps: The three stumps and two bails form the wicket. Stumps are 71.1cm tall from the ground. The overall width (all three stumps) is 22.86cm. The bails must fit into grooves and fall when disturbed.

What are the Official Cricket Pitch Dimensions?

The cricket pitch is a carefully prepared strip of natural turf or artificial surface running between the two wickets. Its length of 22 yards (20.12 metres) was standardised by the Marylebone Cricket Club (MCC) and has not changed since the Laws of Cricket were first codified in 1744. The 22-yard measurement corresponds to one chain — a surveying unit historically used to mark out land — which is why cricket is still informally described as a "22-yard game."

The pitch surface itself is 10 feet (3.05m) wide and is the only part of the ground the Laws specifically regulate for preparation. The groundstaff manages moisture, rolling and mowing with extreme precision — pitch conditions heavily influence the match. A "green" pitch with moisture benefits fast bowlers early in the game; a dry, cracked pitch on day four of a Test causes the ball to grip and turn sharply, favouring spin bowlers.

Beyond the pitch, the fielding restrictions circle (30-yard circle, radius 27.43m from the centre of the pitch) is a critical feature of limited-overs cricket. During powerplay overs, only a limited number of fielders are allowed outside this circle. The boundary itself can vary between 59.43m and 82.29m from the centre depending on ground size, making it the most variable measurement in competitive cricket.

Pitch Length
22 yd / 20.12 m
Pitch Width
10 ft / 3.05 m
Stump Height
28 in / 71.1 cm
Popping Crease
4 ft / 1.22 m from stumps
30-Yard Circle
27.43 m radius
Outfield Min. Radius
59.43 m

How to Use This Calculator

1
Unit: Toggle between metres, feet, or yards — yards is the traditional measurement format used in the Laws of Cricket.
2
Pitch Layout: The diagram shows the pitch strip, popping crease and bowling crease positions, stumps at each end, and the return creases.
3
Dimension Cards: Detailed measurements for pitch dimensions, stump height/width, 30-yard circle and outfield radius.

Key Pitch Zones

  • • Good length: 6–8m from stumps — the bowler's primary target zone
  • • Short pitch: 3–5m — aims to rise steeply at the batter's body
  • • Full pitch/yorker: At or near popping crease — targeting base of stumps
  • • Powerplay circle: 27.43m radius — restricts fielding in limited overs
  • • Boundary: 59.43–82.29m from centre depending on ground
Source: MCC Laws of Cricket 2017 Code (5th edition 2022); ICC Playing Conditions for Test Matches, ODIs and T20Is 2023

?Frequently Asked Questions